Home > News > How to set the control for the slitter (2)
How to set the control for the slitter (2)
- 2018-11-29-

< span="" style="background: rgb(246, 246, 246); font-family: Arial; font-size: 16px;">  FromPDF Lift the corresponding BOPP film file. Set the winding length and width of the film of the corresponding specification. Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of the corresponding specification.

  Loading: According to the requirements of the cut plan, according to the driving procedures, according to the actual In the case, the corresponding parent roll is hoisted on the aging rack and placed in the slitting machine according to the inner and outer selection direction of the corona surface. On the reel, use the control button to clamp the steel core, leave the steel core support arm and drive.

  Through the film: When slitting machine When there is no film on the film, it is necessary to pass through the film. Using the slitting machine through the membrane device and the function keys, one end of the original membrane is attached to the membrane chain eyelet, and the membrane button is activated to distribute the membrane along the slitting process to be evenly distributed on each roller.

  film: when there is a film on the slitting machine When changing the coil joint, use the vacuum filming table to start the filming table to the working position, manually flatten the film on the first pulling roller of the slitting machine and start the upper vacuum pumping film to make the film flat. On the filming table, attach double-sided tape and cut off the excess film under the tape, flatten the film on the unwinding frame and start the lower vacuum pump to make the film flat, absorb the paper layer on the tape and flatten the adhesive film. The joints should be neat and wrinkle-free, then turn off the upper and lower vacuum pumps and open the filming station to the inoperative position.

  Hangzhou Youzheng Hengguang Machinery Equipment Co., Ltd. is a technology specializing in the design, development, production, sales, maintenance and optimization of winding equipment such as slitting and rewinding. With its professional level and mature experience in the field of winding, the company has successfully developed computer-controlled slitting machine, inspection machine, winder and other series. Our company has more than 10 years of industry experience, and is in a leading position among similar companies. In response to the development needs of the market, our company has developed more than 50 types of products, which can basically meet 80% of the market demand.   

  The above is the whole content of my compilation, I want to know more about slicing machine related information, just pay attention to the official of our company Internet cafe!