In the slitting process, the fully automatic tensioning system of the slitting machine is a product to ensure product quality. For important purposes, magnetic powder clutches and brakes are a special type of automation components. The automatic slitting machine is used to supplement the task of leisure or film. Changing the magnetic current can modify the magnetic state of the magnetic powder and generate the notified torque. It can be used for stepless speed regulation from zero start to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed control system. The automatic slitting machine controls the mutual tension between unwinding, drawing, slitting, winding, etc., so that the slitting material is always in a relatively stable state during the slitting process.

        Assuming the tension is handled safely, the automatic slitting machine can avoid the deformation of the raw materials during the process of mechanical acceleration and deceleration. , drift and other phenomena. Naturally, it will cause unnecessary trouble to the next process. Most of the slitting machines of the automatic slitting machine use the magnetic powder clutch to control the tension, but the magnetic powder clutch speed can not be too high. The automatic slitting machine is easy to form the high-speed interference of the magnetic powder during operation, and the automatic slitting machine is now Most of them use the sagittal inverter electromechanical to control the tension system of the slitting machine. The automatic detection of the pendulum roller is used, and the automatic slitting machine prolongs the life of the slitting machine. When it is strict, it will be stuck and the machine will run poorly.

        With the development of technology, it divides the raw materials into many self-reliant units, and the task is to put the raw materials in the air. On the material, one end of the discharge shaft is equipped with a magnetic powder tension controller to stabilize the tension required for the raw materials, and then a pair of rubber rollers are used to pull the raw materials, and the automatic slitting machine cuts into a number of strips by the blade. Supported to A, B to rewind and interrupt the finished product.