The main components of the automatic slitter should be inspected and lubricated before use; when inspecting and disassembling the automatic slitter, the use of unsuitable tools and unscientific Method of operation; the machine should be thoroughly cleaned and inspected. After two weeks, the automatic slitter should be compared.

    If you do not use it for a long time, you must clean all bright surfaces, apply anti-rust oil, and cover the entire machine with a plastic cover. If the automatic slitter is deactivated for more than 3 months, cover the anti-rust oil with moisture-proof paper; after the work is finished, carefully clean the equipment and dry the exposed friction surface.

    Daily Maintenance

    To do the daily maintenance of the slitter, you should do the following five points.

    First of all, regular cleaning of electrical components should be carried out to eliminate hidden dangers in a timely manner.

    Second, the use of slitting machines depends on the longitudinal and cross-cutting machines, so high-quality vertical and cross-cutting knives should be used.

    The third is to do the daily maintenance of the slitting machine. The standard is that the sliding parts of the equipment should be smooth, clean and clean (no dust, no debris) to ensure that the sliding parts of the equipment are in good condition.

    The fourth is to stop regular and irregular inspections of rotating parts (especially for real-time monitoring of consumables). Regular adjustments, periodic replacements, commutators and fine recording to extend the life of the equipment.

     Fifth, in order to improve the technical quality and level of the operator of the slitting machine, the operation of the control part should be carried out by a special person. No one may operate without permission.