Home > News > The main features and defects of film slitting machine
The main features and defects of film slitting machine
- 2018-11-24-

  You know film slitting machine? You understand film Cutting machine main features and defects? Today, You Zheng Hengguang Xiaobian compiled relevant information for everyone, let's take a look!

  The film slitter is used very frequently. It can cut a wide sheet of paper or film into a uniform paper or film. Some paper machines or printing machines use film slitting machine >. The film slitting machine mainly drives the shaft of the rewinding and unwinding by an internal motor, and puts the magnetic powder clutch on the shaft, and adjusts the resistance generated by changing the current of the clutch to change the tension of the machine.

  Magnetic powder clutches and brakes are a special type of automated actuator that is filled with work The magnetic powder of the gap transmits the torque, and changing the excitation current can change the magnetic state of the magnetic powder, thereby adjusting the transmitted torque. It can be used for stepless speed regulation from zero start to synchronous speed. It is suitable for high speed section fine adjustment and medium and small power speed control system. It is also used to condition the torque with a conditioning current to ensure a constant unwinding or rewinding tension control system during winding.

  film slitting machine The main feature is the magnetic powder clutch as a The resistance is installed and controlled by the system to output a DC voltage to control the resistance generated by the magnetic powder clutch. The main flaw is that speed cannot High, high-speed operation is easy to form high-speed friction of magnetic powder, resulting in high temperature, forming magnetic powder clutch heat and shortening its life. The cutter is used to stop the longitudinal cutting of a certain width of the coil and cut into several narrow-cut sub-rolls for installation.

  Mount it on a calender or extruder, After the unit such as the gluing machine is installed, the continuous cutting can be completed, often with a winding installation. The knife can be used with a flat knife and a round knife.

  The above is the whole content of Xiaobian, and I want to know more about Film slitting machine related information, come to pay attention to our official website of Youzhen Hengguang Machinery!