< p="">  Today Hengguang Machinery Xiaobian for everyone For more information on the structure of paper slitting machine, let’s take a look!

  Paper slitting machine consists of frame, transmission system, receiving and discharging machine, tension control device, traction member, slitting bracket, waste winding and discharge device. The drive of the paper slitter is driven by the main motor to drive the rubber roller and the receiving shaft to operate synchronously to achieve the purpose of stretching and discharging the finished product.  

1. paper slitter frame and drive system: paper slitter frame by left and right walls The plate is composed of a support block and a discharge mechanism. The drive system is mainly used to pull raw materials and wind the finished product. It is driven by a variable frequency stepless speed regulating motor through a motor V belt to drive the rubber roller. The main traction rubber roller and the driven traction rubber roller are in close contact with each other. The traction material is driven and the lower circular cutter shaft is operated synchronously by the active traction rollers for better cutting requirements. The lower circular cutter shaft drives the winding A and the winding B to perform synchronous operation to achieve the purpose of receiving the material.  

2. Receiving mechanism and tensioning device: The receiving mechanism of the paper slitting machine is mainly composed of a chain, a synchronous wheel, a magnetic powder clutch and an air expansion shaft. As long as the adjustment is made, the two reels are controlled by a single motor. The current of the magnetic powder clutch can change the tension of the receiving shaft.  

3. Traction member: The traction member of the paper slitting machine is mainly composed of a pair of traction rubber rollers and a plurality of hard alumina rollers for taking out the raw materials of the finished winding. Power is obtained from the motor through V. The belt is passed to the active traction roller for operation.  

4. slitting knife holder: The slitting knife holder of the paper slitting machine has a circular knife slitting and a straight knife slitting. The operating handle allows the circular knife to move slightly axially, and the round blade and the cushion cover are adjusted by the planar cam. The shear gap of the groove.  

5. Waste rewinding and discharge: The wind is blown through the duct by the wind of the blower.  

6. Drainage mechanism and automatic rectification: The discharge mechanism is mainly composed of discharge shaft, support block, cylinder, base, left and right moving seats, etc., consisting of automatic correction device: photoelectric opening, correction Guide rollers, left and right brackets, correct the moving plate and ball. Nuts and screws, synchronous motor and left and right limit switches.  

  Paper slitting machine divides the material into several separate units. The working principle is to fix the raw material at the end of the discharge shaft and install a magnetic powder tension controller to make the required tension of the raw material constant, and then pass a pair of rubber rollers. Pull the ingredients and cut them into pieces by a blade. The guide rolls are then directed to the A and B winding reels to wind the finished product.