You know Non-woven slitting machine? You know non-woven slitting machine everyday isHow to maintain it? < span="" style="font-family: 宋体;"> Today, Youzheng Hengguang Machinery Xiaobian has compiled some relevant information about the maintenance of non-woven slitting machine. If you are interested, you can see it together. Look!   ;

Maintenance Nonwoven Slitting machine is necessary because in the course of work, especially after long-term use, if some of the workpieces are not repaired in time, if the lubrication is not enough, friction will occur, which will easily lead to the machine in the long run. A malfunction such as damage or paper jam has occurred.

Therefore, it must be properly lubricated and kept Some friction parts of the non-woven slitting machine. In addition to the lubrication machine, the following inspections and maintenance work must be carried out every week: check the thickness of the non-woven slitter brake disc. Replace them as they wear out. Check that the linear guide of the non-woven slitter is clean and clean if necessary.

Check Non-woven slitting machine Whether the belt maintains proper tension. Check the air line of the non-woven slitter for air leakage, clean the air filter, and clean the filter element at least once a month. Check the surface of all rubber rollers of the non-woven slitter. Please note that they are not hard materials and must not be in contact with the cutting tool.

Weekly use 1 litre clean Liquid (warm water with low surface tension soap or solvent, wait for the solution to dry faster) and wipe the roller with a lint-free cloth. Check the air filter fan filter of the non-woven slitter. If there is too much dust, replace it. When the non-woven slitting roller becomes dirty, it can be scrubbed with fine gauze and industrial alcohol, but be careful not to rub the black part with alcohol to avoid rust.

non-woven slitting MachineThe inspection and maintenance points are basically the same. In addition, if the machine is not used for a long time, the machine must be cleaned and coated with anti-rust oil, and a plastic sleeve must be used. The machine is covered. If the machine is deactivated for more than 3 months, apply a layer of moisture-proof paper to the rust preventive oil.

Okay, the above is Xiaobian I For all the content for everyone, I would like to know more about the non-woven slitting machine to pay attention to our official website of Youzheng Hengguang Machinery!