You know paper slitting Is the structure and operation of the machine? Today, You Zheng Hengguang Xiaobian has compiled some information, and if you are interested, read it together!

  In general mechanical systems such as racks, transmission systems, retractable waste paper machinery and traction components, slitting brackets A paper slitting machine is manufactured under the combination of the waste rewinding, the discharge device and the most important tension control device. The machine is characterized by the fact that it can be broken down into individual objects, and its working method is to fix the raw materials on the machine. There is a magnetic powder tension controller at one end of the discharge shaft, so that the required tension of the raw materials can Balanced by the controller.  

  After a pair of rubber rollers to pull the raw materials, cut into several pieces through the blade < pan="">. After the guide rollers are guided to the A and B winding reels to complete the finished product. Its transmission is driven by the main motor to drive the rubber roller and the receiving shaft to run synchronously to achieve the purpose of traction and finished product receipt. ;

  Rack and drive system: the frame consists of left and right wall panels and supports and discharge machinery. The transmission system is mainly used to pull raw materials and wind up the finished product. It is driven by the variable frequency stepless speed regulating motor through the motor V-belt to drive the traction roller. The main traction rubber roller and the driven traction rubber roller are closely attached. And synchronously running the traction material to walk, through active traction The roller drives the lower circular cutter shaft to run synchronously to achieve better cutting requirements. The lower circular cutter shaft drives the winding A and the winding B to perform synchronous operation, thereby achieving the purpose of receiving materials.  

  The receiving mechanism mainly consists of timing belt, synchronous wheel, magnetic powder clutch, and air shaft.. The timing belt is transmitted to the synchronous wheel to operate the input shaft of the magnetic powder clutch. As long as the current of the magnetic clutch is adjusted, the tension of the receiving shaft can be changed.  

  Traction members: The traction members mainly consist of a pair of traction rubber rollers and a number of hard oxidized aluminum rollers, which are used to take the raw materials for the winding of the finished product. Its power comes from electricity Pass the V-belt to the active traction roller to run it.  

  Slicing knife: slitting The tool holder has a circular knife slitting and a flat knife slitting. . Operating the handle through the plane cam enables the circular knife to make a slight axial movement to adjust the cutting gap between the round knife edge and the gasket groove.