slitting machine Operation:

four, boot

  1. Change the specifications, the inner and outer winding arms have a good paper core, and the press roller informs all personnel to leave when the operation is ready. Machine, ready to run.

  2. Put the main console ANTI-STAIC BARS in AUTO, READY TO RUN on, start MACHINE RUN Start up and run.

V. Cut control In the process of cutting, carefully monitor the observation operation The cutting effect is suitable for the adjustment and control of the slitting speed, the unwinding tension, the contact pressure, the curved roller, the edge pulling roller, and the leading edge.

Six, Receipt

  1. When the inner and outer ends of the machine are stopped, use the unloading button to place the film on the prepared unloading trolley, cut the film and paste the film roll with the sealing glue.

  2. Use the collet release button to release the chuck and check whether the film cores have left the core. If one is still stuck on the core, manually remove the film roll manually.

  3. After ensuring that all the film leaves the chuck on the trolley, use the film button to raise the winding arm, install the corresponding paper core, and attach the film to the paper core for the next slitting.

seven, parking

  1. When the film roll is run to the set length, the device automatically stops.

  2. During the operation of the device, you can press MACHINE STOP to stop as needed.

  3. When fast stop is required, press the MACHINE STOP button to be greater than 2S.

  4. When there is an emergency such as equipment or human accident, press EMERGENCY STOP to stop the emergency.

eight, note

  1. Ensure that the voltage, current and hydraulic equivalents are correct and stable before starting the machine.

  2. Before the equipment is ready to run, all personnel must notify the departure device to ensure personal safety before starting the operation.

  3. When the slitting machine is running, it is forbidden to touch the running film roll or the roll core by hand to avoid personal injury caused by the hand being caught.

  4. During the operation, it is forbidden to scratch or cut each roller core with a knife or a hard object.

  You Zheng Hengguang Machinery as a professionalWind film slitting and rewinding machine ,Checker ,Rewinding Inspection MachineManufacturer, dedicated to provide you with quality service, welcome to call!

 The above is the information compiled by Hengguang Xiaobian for everyone, want to know more slitting machine or slitting Machine-related information, just pay attention to our official website of You Zheng Hengguang Machinery!